Your cart is empty
Description
Shamrock’s NanoFLON® Series consists of submicron polytetrafluoroethylene (PTFE) powders. NanoFLON® makes it easy to impart key fluoropolymer properties to your product, including slip, wear resistance, and release.
Product Description
NanoFLON® 119N-RC is based on prime PTFE which is agglomerated form of emulsion polymerized sub-micron primary particle sized PTFE and are produced to be in compliance with EU regulatory requirements.
Application
NanoFLON® 119N-RC is a performance additive designed for various thermoplastics and elastomers to reduce friction, stick-slip, and enhance anti-wear properties. Complete dispersion into primary particles for optimal performance can be achieved by pre-mixing in high intensity mixers and extruded as a concentrate or masterbatch.
NanoFLON® 119N-RC may be compounded into polyesters, polyamides, polystyrene, polyvinylidene fluoride, and other engineering plastics and blow-molded into thin films to impart the desired surface slip.
Features and Benefits
- Friction Reduction/Wear
- High Surface Area
- High Thermal Stability
- Improves Stick-Slip Response
- Low Acidity
- Noise Reduction
- Process aid
- Reduce Noise
- Reduce Wear
- Submicron
- Wear Control
- Wear Resistance
Typical Properties
Particle Size Mean Value
< 10 µm
Specific Gravity
2.10 – 2.20
Bulk Density
250 – 450 g/l
Specific Surface Area
7 – 9 m2/g
DSC Melt Point
326ºC - 328ºC
Regulatory Status
The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product complies with the Commission Delegated Regulation (EU) 2020/784 on PFOA and (EU) 2021/1297 on C9-C14 (per Shamrock QSOP-202E and QSOP-205E).
Safety, Shipping and Handling
For complete safety, shipping and handling information please contact your regional Customer Service Representative, or our Customer Service Team at customerserviceteam@shamrocktechnologies.com.
For more information about Shamrock’s other products or capabilities please visit us at our website, ShamrockTechnologies.com.
Recommended Level: 5 – 20% as a compound, and 3-5% as a final additive.
Additional Information
End Use Applications
Aerospace, Appliance, Automotive, Aviation, Composite, Electronic, Extrusion (shapes), Fiber, Foam, High Melt, Industrial, Injection Molding, Insulation, Long Fiber Composite, Low Melt Acid Sensitive, MasterBatch, Mechanical, Micromolding, Plastic Foam, Rotomolding, Sporting Goods, Synthetic Fiber, Thermoforming, Thermoplastic, Thermoset, Thin Wall
Composition
PTFE