skip to main content

FluoroSLIP® 605

Synthetic Wax/PTFE Blend

In 1975, Shamrock discovered that the combination of PTFE and wax provided slip and rub/abrasion resistance that neither could do alone. FluoroSLIP® products are formulated on this principle.

Product Description

FluoroSLIP® 605 is a combination of spherical synthetic wax and PTFE.


FluoroSLIP® 605 can be used in both the ink and coatings industries. FluoroSLIP® 605 is recommended for offset inks and water-based, solvent-based and UV systems at 1-3% of the total formulation weight. It is also used in powder coatings.

Features & Benefits

bullet2.gifExcellent Rub and Abrasion Resistance
bullet2.gifGood Slip
bullet2.gifScratch Resistance

Typical Properties

Property Name Value
99% Particle Size15 μm
Hegman Grind6.5 min 
Melting Point230/110  °F/°C
NPIRI Grind4.5 max 
Particle Size Mean Value7 μm
Specific Gravity0.95 g/cm3

Regulatory Status

The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product meets the requirements of 21 CFR 175.105, 175.300, 176.170, and 176.180.

Safety, Shipping & Handling

For complete safety, shipping and handling information please contact your regional Customer Service Representative, or our Customer Service Team at
For more information about Shamrock’s other products or capabilities please visit us at our website,

About Us

Shamrock pioneered the development of PTFE and wax additives in the 1970s, first for inks and coatings, and later for a wide range of applications including lubricants, personal care products, polymer additives, and many more.

Service First & Foremost

Top-notch customer service is our bottom line, and a key driver behind Shamrock's significant commitment to research and development.

Contact Info

Address: Foot of Pacific Street, Newark, NJ 07114
Phone: 973-242-2999
Fax: 973-242-8074

Copyright © 2015 Shamrock Technologies. All Rights Reserved.